Company News

Industry News

Media coverage

Information publicity

Industry knowledge

Kermit Aluminum Practice Lean Management to Speed up Industrial Development

Kermit Aluminum Practice Lean Management to Speed up Industrial Development

As we all know, one of the secrets of Toyota's success in the international market competition is to create a new management model-Toyota production mode. This model has been more and more favored by many enterprises in China in recent years, but many enterprises always feel that they can't learn the essence, and they can't push it down to a certain extent. In recent years, Kemet Aluminum has been practicing lean management while striving for innovation in production links, and has achieved good results. Since 2014, the company has officially introduced lean production, implemented a number of management models, adhered to continuous full-staff learning and improvement, set up a management office that implements lean thinking, and drastically carried out lean management on the production line, which not only promoted the improvement of production efficiency and cost reduction, but also greatly met the high standard requirements of customers, and the on-site management level has also been greatly improved. Lean management mainly focuses on lean foundation, process improvement, performance-driven and other aspects. First of all, through the establishment of lean thinking and habits at the middle and senior levels, the order-oriented process system and the mechanism of daily benefit, monthly performance and annual assessment are determined, KPI indicators, 4MY management, proposal management, process management and other methods are made, so that lean can be implemented and expanded in management, and in turn, lean improvement on the production site will be driven again, and lean management promotion and overall performance improvement will be realized. However, the cultivation of lean management awareness, process compliance and performance improvement in non-production links are a long process, and the cultivation of these thoughts and habits is prone to repetition. The company's lean practice is still in its infancy, and more improvements and innovations are needed, which will be a long way to go. Through the introduction and practice of lean management in the company, various indicators show the advantages of lean management. A good evaluation method is to combine financial results with process improvement, so that lean management can be measured by data and finance. At the same time, we should do a good job in the training and implementation of lean thinking and implementation tools, so that all staff can understand lean management thinking and master relevant tools, and promote the improvement and combination of functional departments and production departments, turning the focus from interests to methods, formally establishing a new management model in production, creating a lean enterprise with both form and spirit, achieving the improvement of overall production performance, laying a brand influence for Kemet Aluminum, and gradually realizing The leap to international development has become a competitive aluminum enterprise. Lean Office Gao Kun

View the details>>

Please make way for our dream-front-line staff of Kemet Aluminum Packaging Workshop

Please make way for our dream-front-line staff of Kemet Aluminum Packaging Workshop

The continuous high temperature in the dog days seemed to be deliberately "baking" to test our willpower and endurance. When we walked into the packaging workshop of Kemet Aluminum, waves of heat waves raged towards our bodies, making people feel as if they were in a "steamer". The sandblasting machine made a "roar" sound, and even the speech had to be increased in decibels. The heat waves emitted by the wood grain furnace had to devour people and avoid them quickly, the front-line employees are in a working environment where only fans send cool air and the sound of machines is constantly roaring, but they can still concentrate on and work overtime to pack the profile products quickly so as to reach the customers quickly. Packages of finished products continue to be born from their hands, no one complains, no one flinches, they stick to their posts with a serious and responsible attitude as always. Even though the environment was extremely hot, after learning that the delivery time was long due to the full order volume, in order to make kemet aluminum reach the customers as soon as possible, the front-line staff in the packaging workshop carried forward the spirit of not fearing hardship and tiredness from top to bottom, and the day shift staff voluntarily gave up the afternoon meal time, worked overtime and overfulfilled the orders issued by the company on time. In particular, the squad leader set an example and stayed ahead of everything. He took the lead and pasted films, wrapped materials, shrunk and punched paper in an orderly manner. With the joint efforts of all personnel, the monthly packaging workshop orders were completed in a timely and rapid manner, and there was no material pressing. In particular, the workshop completed packaging output of 4779 tons in July, breaking through the production capacity, up nearly 15% from the previous few months, which is the highest monthly output in history. The weather is hot and the temperature is high, but all the employees in the packaging workshop are not afraid of the heat and have created a miracle in the history of production with their own efforts. This situation really inspires other workshops. Faced with the problem of large orders and production demand exceeding production capacity, all production workshops of Kemet Aluminum Co., Ltd. worked overtime and brainstormed to improve the production qualification rate. All employees were full of fighting spirit and devoted themselves to life, creating a myth in the production history of July. In this hot environment, the packaging front-line staff fight against the heat with the spirit of hard work and constantly "declare war" on the heat. We will use our actions to promote the development of the enterprise. Please make way for our dreams!

View the details>>

Energy saving and environmental protection, building energy saving, huge market potential

Energy saving and environmental protection, building energy saving, huge market potential

According to relevant technical departments, in first-tier cities across the country, such as Beijing and Shenzhen, building energy consumption accounts for about 1/3 of the city's total energy consumption, which is a very huge energy consumption, enough to attract the attention of relevant people. Energy saving in construction projects is a more direct and cheaper fundamental measure to alleviate the contradiction of energy shortage in China, improve people's living and working conditions, reduce pollution and promote sustainable economic development. Most people pay attention to building the project at a very low cost, and do not consider enough in building energy conservation. Taking residential buildings as an example, the measured values of energy consumption in various aspects of a residential building in an energy-saving community can be seen that for residential buildings with external walls using building thermal insulation materials, the cooling and heating period of residents using air conditioning is 1.5 months less than that of residential buildings without external wall thermal insulation materials, and the daily operation time is short and energy consumption is low, energy saving is more than 25%. With solar heat collection as the main, electric heating as the supplement, hot water supply is available for 365 days a year, which can ensure the normal use of a family of 3. The average annual electricity saving of households is about 800kWh, which can save more than 400 yuan. Solar lighting ensures the normal use of garden lights and lawn lights in the community, which is not only environmentally friendly and energy-saving, but also beautifies the community environment. A total of 23 solar garden lamps, 25 lawn lamps and 16 decorative lamps are installed in the residential area, with a total power of 1500W, which can save about 6000 yuan in electricity and maintenance costs for the residential area every year. Floor radiant heating has comfortable and energy-saving floor heating in winter, and can also be used for ground source heat pump air conditioning in summer to control temperature. It has the characteristics of convenience, comfort, green and environmental protection. It is estimated that it can save 20% to 30% energy compared with traditional radiator heating and centralized air conditioning. The domestic sewage treatment station is fully automatic, no noise, no odor, and has formed a scenic ecological artificial wetland in the community. Every day 22 tons of sewage treatment, for the community green sprinkler irrigation, landscape, flushing road, saving 8 thousand tons of water per year. Ordinary residential buildings have high energy consumption, hot summer and cold winter, and poor comfort. The residential area due to the use of a special wall, both thermal insulation and insulation. The indoor temperature in summer is 2 ℃ to 3 ℃ lower than that of ordinary buildings, and the indoor temperature in winter is more than 4 ℃ higher than that of ordinary buildings, which shows obvious comprehensive benefits. The cost of housing is about 5% higher than that of general construction, but due to energy efficiency and optimized combination, annual operating expenses can be saved by more than 50%. It can be seen that the energy savings in the building is still considerable. In the design of building energy efficiency, the design of building envelope components (including roofs, walls, foundations, insulation materials, sealing materials, doors and windows, and shading facilities) has a fundamental impact on building energy consumption. The cost of the general enclosure structure is only 4% to 6% of the total investment, and the cost can be increased to 20% to 40% after the use of energy-saving materials. The state expressly stipulates that since January 1, 2002, the use of solid clay bricks will be stopped. Modern buildings are developing in the direction of high-rise, large-bay, and large-span, requiring the use of lighter, more convenient, more flexible, and higher physical properties. The new enclosure building materials meet the requirements of energy conservation and environmental protection. At present, the wall in the heating area has further developed the high-efficiency thermal insulation and energy-saving wall, and the composite wall is used for thermal insulation, which not only deliberately eliminates the influence of thermal bridge, but also makes the wall relatively "thin". The design and material use of building doors, windows and roofs are the key to reducing energy consumption. Doors and windows are the weak link of heat transfer and cold air infiltration, and their thermal insulation performance puts forward higher requirements. In order to improve the thermal insulation performance of the roof, the main application of light and efficient low water absorption or non-absorbent, long-term use, stable performance of the thermal insulation material as a thermal insulation layer and improve the roof structure. In addition, energy-efficient heating and air-conditioning systems and measures to reduce indoor cooling and heating load can truly reduce heating and air-conditioning energy consumption. In the new residential indoor heating system should use the new double pipe system, low temperature floor laying and other heating methods, not only good thermal stability, feel comfortable, save energy, long service life, and the implementation of household heating metering charges, to prevent waste. The use of new energy is also a new way to save energy. We are vigorously promoting the innovation of building science and technology, striving to achieve new technological breakthroughs in the fields of wall insulation, door and window insulation, green lighting, etc., and at the same time, further encourage and support the large-scale utilization of renewable energy in the construction field. In terms of energy conservation and environmental protection, the use of new energy plays an increasingly important role in building management, such as solar energy, geothermal energy, wind energy, biomass energy and so on. In terms of building management, we should continue to use natural energy, residual energy and waste energy from the perspective of energy saving, and do a good job in the recovery and utilization of waste heat and waste water recovery and reuse. The continuous progress of science and technology promotes the energy saving of building engineering, and the energy saving of building engineering will no longer become a separate consideration and burden attached to the traditional building, but become the established architectural design concept and standard. However, there are still some problems such as low implementation rate, imperfect laws and regulations, lagging management methods, imperfect energy-saving market, weak public awareness and so on. It is necessary to improve relevant laws and regulations, improve management methods, improve energy-saving market and improve public awareness through publicity in the future.

View the details>>

What knowledge does the balcony have

What knowledge does the balcony have

In the process of house decoration, sealing the balcony is an essential link. When choosing the business of sealing the balcony, it should be comprehensively considered from the aspects of materials, price, manufacturer, after-sales and so on. Balcony sealing, in the decoration of this link can be indispensable, from the safety, environment, life, space and other aspects of consideration, sealing the balcony is essential, then why must seal the balcony, what kind of benefits and effects does it have? The first is to reduce the noise: the balcony generally uses hollow glass plastic steel doors and windows or broken bridge aluminum doors and windows, it is best to use plastic steel casement windows or broken bridge aluminum casement windows, so that the sound insulation effect is better, thus greatly reducing the impact of external noise on life. The second is safety: after sealing the balcony, the house has another layer of protection. When the social security can not reach the level of not closing the house at night, one more layer of protection will set up an obstacle for criminals, which can play a preventive role. The third is hygiene: after installation, a layer of dust-blocking windows is added, which is conducive to blocking the invasion of sand, dust and rain. The sanitary condition of the room is better than that of the unsealed balcony. The fourth is to expand the scope of use: in the case of relatively tight living conditions, the closed balcony can be used as a space for writing and reading, storage of goods, fitness and exercise, as well as a living space, which is more diverse than when the balcony is not closed, increasing the use area of the room. In this high-priced life, the balcony also occupies a lot of space. The fifth is to broaden the design idea: after the balcony is closed, the same indoor space can be connected as a whole by removing the door and connecting the window. It is conducive to overall consideration in the design, especially in the design of irregular rooms, should take the form of balcony, the overall design of irregular space. What are the materials of the balcony? (1) ordinary aluminum alloy window: (advantages) it has good weather resistance and anti-aging ability. (Disadvantages) The heat insulation is not as good as other materials, and the sealing and heat preservation performance is not very good. (2) frameless window: (advantages) it has good lighting, the largest area of air convection, beautiful and easy folding. (Disadvantages) Poor heat preservation, poor sealing, and general sound insulation. (3) plastic steel window: (advantages) it has good sound insulation, heat insulation, fire resistance, air tightness, water tightness, corrosion resistance, heat preservation and so on. (Disadvantages) After all, it is a PVC plastic profile. The surface will be yellowed and the form will be deformed after a long time. The service life is 20-30 years. (4) Broken Bridge Aluminum Doors and Windows: (Advantages) Aluminum with a wall thickness of more than 1.4 is added with a heat insulation layer on all the basis; it also has good sound insulation, heat insulation, fire resistance, air tightness, water tightness, corrosion resistance, heat preservation, maintenance-free, etc.; it is a metal aluminum profile that can be used for a long time without change and color fading. (Disadvantages) The price of aluminum is expensive and the production cost is relatively high. The above four materials are the mainstream balcony sealing materials in China, of which ordinary aluminum alloy and frameless windows are mainly used in the balcony sealing in the south, while plastic-steel doors and windows and broken bridge aluminum doors and windows are mainly used in the balcony sealing in northern cities. With the prosperity of the society and the hustle and bustle of urban life, plastic-steel doors and windows and broken bridge aluminum doors and windows are gradually used in the balcony sealing operation in the vast southern cities. How long is the time limit for sealing the balcony? 1. The production cycle of ordinary white plastic steel doors and windows or broken bridge aluminum doors and windows in general factories is about 10 days, and the installation of sealing the balcony only takes 1 day. If there are special circumstances or more square meters, it takes 2 days. 2. The sealed balcony is a special-shaped balcony. It takes 15-20 days for special window shapes to be customized, or for color treatment and tempered glass treatment, and only 1-2 days for sealed balcony installation. sealed balcony what material is best? At present, the materials for sealing balconies are mainly aluminum doors and windows with broken bridges and aluminum-clad wood doors and windows, of which aluminum doors and windows with broken bridges are most widely used in family decoration, while aluminum-clad wood doors and windows are mainly used in high-end villas and hotels, and the price is also very expensive. Although aluminum doors and windows with broken bridges are the most popular doors and windows nowadays, consumers should identify the top ten brands of aluminum doors and windows and windows and windows and windows and windows with broken bridges in China, remember to choose those unknown miscellaneous brand broken bridge aluminum for cheap, often the material wall thickness is lower than the national standard. The colors of plastic steel doors and windows sealed balconies are: red teak, light walnut, red walnut, Sabri, beech, black teak, sandy black, sandy gray, brown, green, grass green, light green, white maple, medium gray, silver gray, bright red, ancient red, golden walnut A, golden walnut B, pine, all kinds of colored plastic steel doors and windows are available to make your windows more beautiful! The color of the broken bridge aluminum doors and windows sealed balcony is powder sprayed, and there are thousands of colors for you to choose from.

View the details>>

The choice of aluminum profile is really the thicker the better?

The choice of aluminum profile is really the thicker the better?

Daily people in the consumption process, there will be such a consumption concept: the higher the price of goods, the better, the more the better, the more materials the better... Because the more sufficient materials, the corresponding price will be higher, the quality will naturally be better. In the purchase of aluminum alloy profile products, the price of the profile is mainly determined by the thickness of the wall thickness, but consumers usually have a misunderstanding: the thicker the profile wall, the better. Many consumers in the purchase of aluminum alloy doors and windows, will take it for granted that the thicker the aluminum wall thickness, more than the national standard, the better the product quality, in fact, is not the case. According to industry insiders, the national standard for product wall thickness is set in accordance with the requirements of energy conservation and environmental protection to ensure product safety and performance. It is not that the thicker the product wall thickness, the better the product quality. Because the thickness of the profile wall is too thick, it does not guarantee the air tightness and water tightness of the product, the product quality is high, and it will definitely bring excessive waste of resources. Moreover, there are more consumables for products that are too thick than those that meet the national standard, which will inevitably bring high product prices and bring unnecessary economic burdens to consumers. Therefore, aluminum products that meet the requirements of national standards can be called good products. Generally speaking, as long as the advertising aluminum produced by the regular aluminum alloy profile manufacturers are made of high-quality aluminum ingots, with good tensile strength and yield, and the thickness of the profile strictly implements the "national standard". It can be seen that the wall thickness of aluminum alloy profiles is not the thicker the better. Only in line with the relevant national standards can the quality of the products be well guaranteed.

View the details>>

Kemet Aluminum Launches T140 Lifting sliding doors Widely acclaimed

Kemet Aluminum Launches T140 Lifting sliding doors Widely acclaimed

Technology research and development is the core strength of an enterprise, which determines the launch of excellent products and affects the trend and orientation of the market. Recently, the Kemet Aluminum R & D team aimed at the forefront of the market. After countless studies and experiments, it successfully launched the T140 lifting sliding door, which was successfully accepted by the State Intellectual Property Office and once again obtained a unique invention patent certificate. This lifting sliding door is mainly used in relatively large, heavy sliding doors, set lifting and push-pull function in one, which is the previous doors and windows do not have the function. The door has a fixed pulley device, which can fix the push-pull fan, and allows the weight of the movable fan to be large, and the lever principle is used to realize the lifting push-pull function. Its main features are noble and domineering, luxurious and generous, can be fixed in any position according to personal wishes, effectively prevent emergencies and children's slip accidents, and greatly improve its safety performance. When the door leaf is lifted, the airtight material is separated from the outer frame, which effectively reduces the frictional resistance of the switch and improves the smoothness of the sliding of the door leaf; when the door leaf is lowered, the airtight material is completely sealed with the outer frame, which greatly improves its air tightness, Water tightness and sound insulation performance. Suitable for villas, apartments, balcony doors, sun room doors, hotels and other places. At present, this lifting sliding door has been successfully introduced to the market and has been widely praised and favored by customers and consumers all over the world. According to customer feedback, this door has superior safety, air tightness, water tightness, heat insulation and environmental protection. The door type with perfect structure, the maximum specification of sliding door leaf can reach 2800mm * 3500mm, and the maximum load can reach 300kg. For this lifting sliding door, Kemet Aluminum R & D team will continue to learn from the advantages of other similar products, and then continue to optimize and innovate, and develop excellent products that are more suitable for the market and consumers.

View the details>>

Do you know how much money your doors and windows waste every year?

Do you know how much money your doors and windows waste every year?

Doors and windows, we are so familiar with things, do you know, your hard-earned money, from the waste of doors and windows here how much? The answer is: we spend nearly twice as much every year to pay for our own home is not energy-saving doors and windows! When you enjoy the comfort of air conditioning or floor heating in the house, closed doors and windows can only solve the problem of heat convection, but can not block the conduction of heat. A large amount of energy in the house is lost to the outside through the doors and windows of your house, resulting in waste of energy consumption and increasing your energy expenditure. Things would be different if your doors and windows were more energy efficient. One day in early 2008, a German businessman used European standard energy-saving doors and windows to repair the villa in order to make his villa in the suburbs of Beijing meet the green energy-saving standards of German "passive house. After energy-saving renovation, he found that the indoor air-conditioning in summer was 8 degrees Celsius lower than the outdoor, and the monthly electricity bill was also half lower than in the past. Even if the air conditioner is turned on, it will not run refrigeration as frequently as before, with less noise and greatly improved comfort. In fact, the importance of energy-saving doors and windows has long been widely recognized in developed countries. According to the 2013-2017 China metal doors and windows industry development prospects and investment forecast analysis report, in Europe, the use of energy-saving doors and windows has reached 67% of the total number of doors and windows. The vast majority of doors and windows in China are non-energy-saving plastic steel and ordinary aluminum alloy doors and windows, energy-saving doors and windows accounted for only 0.4 percent of the total number of windows. Doors and windows are not energy-saving not only make people spend a lot of money for daily energy expenditure, but also make the country produce huge energy waste. The survey shows that among the main energy consumption in our society, building energy consumption has accounted for more than 20% of the total energy consumption of the whole society since 2000. With the crazy development of real estate in recent years, building energy consumption has accounted for more than 40% of the total energy consumption of the whole society, while the energy consumption lost through doors and windows accounts for about 50% of the total energy consumption of the whole society. In other words, the energy consumption lost through doors and windows accounts for about 20%. The low penetration rate of energy-saving doors and windows has caused China's building energy consumption to be more than 3 times that of developed countries. According to calculations by relevant departments, if the energy-saving level of doors and windows in my country's 43 billion square meters of existing construction area can reach the current European standards, 0.42 billion tons of standard coal will be saved each year, which is equivalent to 20% of my country's total annual coal output. The reduction of coal consumption will directly help to reduce the generation of haze (central heating a large amount of coal is one of the main causes of haze weather in winter in the north). The resulting health level improvement, ecological environment improvement and a series of benefits, will far exceed the cost of energy-saving doors and windows replacement. "Now the latent energy waste is a hundred times or a thousand times larger than the waste of food and drink, among which the door and window is a 'big funnel'. Every household can't live without the door and window, but now most people don't understand the door and window." Ni Shouqiang, vice president of China Construction Metal Structure Association, said the reason. What is the door and window energy saving? In the door and window industry has a heat transfer coefficient, K value. The greater the K value, the more heat is transferred and the more energy is lost; on the contrary, the less heat is transferred, the less energy is lost. According to the current EU standards, the K value of doors and windows is generally between 1.1 and 1.3. In recent years, the K value standard of doors and windows in Germany has been reduced from 1.3 to 1.1, Switzerland has been adjusted from 1.3 to 0.7, and France plans to achieve zero energy consumption in buildings by 2020. On the other hand, the current situation of energy-saving doors and windows in China is worrying. Compared with developed countries, we are nearly 30 years behind. For example, the K value implemented in Shanghai is 2.8, which is equivalent to the German standard in 1984. Fortunately, the relevant government departments have realized the importance of energy-saving doors and windows, and more stringent energy-saving standards for doors and windows are being formulated and introduced throughout the country. Beijing and Tianjin have begun to implement the standard of K value ≤ 2.0, and Inner Mongolia and Northeast China have also implemented the standard of ≤ 2.2. At the Copenhagen Climate Conference, China solemnly promised to the world: "By 2020, my country's carbon dioxide emissions per unit of GDP will drop by 40%-50% compared with 2005, and by 2020, my country's non-fossil energy will account for 15% of one-time energy consumption.%." This means that in the next five years, China will take effective measures to increase energy conservation and emission reduction. Building energy consumption, which accounts for a large proportion of social energy consumption, will bear the brunt, while doors and windows, as the lighting parts of building openings, actually account for 50% of building energy consumption, so that the transformation of doors and windows industry to energy conservation will become an inevitable trend.

View the details>>

Kemet Aluminum Spraying Pretreatment Process Innovation Promotes Environmental Protection and Benefit

Kemet Aluminum Spraying Pretreatment Process Innovation Promotes Environmental Protection and Benefit

In the first half of this year, Linyi City's "iron fist pollution control" paid close attention to environmental protection and dared to show its sword to environmental violations. In the process of development, Kemet Aluminum, which adheres to the concept of "enterprise development, environmental protection first", is responding to the national and government environmental protection policies. Under the condition of environmental protection standards, it has continuously carried out technological environmental protection reforms to add bricks and tiles to Linyi's clear water and blue sky. In this process innovation, the most significant effect is the pre-treatment process reform of the spraying workshop. This process innovation is to change the pre-treatment of spraying from chromium to chromium-free passivation. It has been put into operation since May and has achieved initial results, resulting in good environmental and economic benefits. In terms of environmental protection, the chromating agent used in the previous chromating process contains hexavalent chromium, and the hexavalent chromium compound is toxic and carcinogenic, and has great unsafe factors. It must be specially treated by the Kemet sewage treatment workshop. The process is complicated and a lot of manpower and financial resources are wasted. The newly adopted chromium-free passivation does not contain chromium ions. Chromium-free passivation is an advanced technology both at home and abroad. The generated wastewater can be directly treated with oxidized wastewater without special treatment. After treatment, it will not cause any pollution to the ecological environment and save the sewage treatment cost of nearly 60000 yuan per month. In terms of workshop output, chromium-free passivation and compared with the previous chromizing treatment, the process flow time is greatly shortened. The chromium degreasing time is 30 minutes and chromium degreasing time is 3 minutes, while the chromium-free degreasing time is 8 minutes and the passivation time is 40 seconds, which shortens the process flow time. Not only that, the workload of employees is greatly reduced. Compared with the previous chrome framing method, the chrome-free framing method is faster and easier, and the workshop output is increased by nearly 23%. After 2 months, the operation of the pre-treatment process innovation in the spraying workshop has gradually stabilized, and the chromium-free passivation is better than the chromium treatment in terms of ecological environment, cost and output efficiency. Process innovation is an important way to promote the development of enterprises, and it also has a profound impact on the environment. While maintaining healthy and rapid development, Kemet Aluminum has the courage to assume social responsibility, put the concept of environmental protection in the first position of enterprise development, keep pace with the times, and introduce advanced technology in all aspects, laying a solid foundation for the long-term development of enterprises in the future!!

View the details>>

Kemet Aluminum successfully passed the energy-saving certification supervision and audit

Kemet Aluminum successfully passed the energy-saving certification supervision and audit

On June 16, 2015, an expert inspection team composed of Qingdao Branch of China Quality Certification Center conducted a two-day on-site review of our company. Under the leadership of the company and the close cooperation of various departments, our company successfully passed the energy-saving certification supervision and audit. During the audit process, the expert group conducted a comprehensive inspection of the consistency of our company's energy-saving products in accordance with the principles of independence, objectivity, fairness and impartiality. From the purchase of raw materials, supplier evaluation, product process, production process, finished products, etc. were supervised and audited; at the same time, our company's production capacity, hardware facilities, working environment, etc. were systematically inspected, and finished products were sampled at the workshop site and designated experiments were carried out. After testing, the thermal insulation performance, heat transfer coefficient and other properties of our company's energy-saving products meet the standards, and all inspections meet the requirements of energy-saving products. The quality of our company's energy-saving products has been unanimously praised by the expert group. Continuously developing more energy-saving, more environmentally friendly and more advanced products has always been the goal of Kemet Aluminum. The successful passing of the annual supervision, inspection and audit of energy-saving certification not only shows our company's complete production management system and high-reliability, high-energy-saving and high-quality products, but also marks the continuous improvement of our company's management level. successfully maintain the great advantages of the company's products in the industry and the sustained competitiveness of the market, and lay a solid foundation for the company to achieve its strategic goals.

View the details>>

Kemet Aluminum successfully co-organized the third city-wide project quality management and housing construction quality improvement activities of Linyi Housing and Construction Bureau.

Kemet Aluminum successfully co-organized the third city-wide project quality management and housing construction quality improvement activities of Linyi Housing and Construction Bureau.

Comrade Qian Chunping, chairman and general manager of the company, and the company's senior management team accompanied and received Director Zhang and his party. On June 5, 2015, Linyi Municipal Housing and Construction Bureau's third city-wide project quality management and housing construction quality improvement activities were carried out as scheduled. This activity was sponsored by Linyi Municipal Housing and Urban-Rural Construction Bureau, and Kemet Aluminum Co., Ltd., as the scene of systematic doors and windows observation, co-organized the activity. More than 250 people participated in the activity, including the housing and urban rural development bureaus of various counties and districts, the Construction Bureau of Linyi High-tech Industrial Development Zone, the Construction Bureau of Linyi Economic Development Zone, the Planning and Construction Environmental Protection Bureau of Mengshan tourist area in Linyi City, and large real estate groups, large door and window factories and supervision companies in Linyi City. Comrade Zhang Jimin, deputy director of Linyi Municipal Bureau of housing and urban rural development, Yang Jianping, director of Linyi construction safety engineering quality supervision and management department, and Li Zeng, director of Linyi construction industrial products production centralized management office, attended the event and made important guiding speeches. This activity site observed the construction site of typical profile production and system door and window research and development enterprise Kemet Aluminum and high-end community Linyi Yuelan Mountain Project. Director Zhang Jimin and his entourage came to Kemet Company. Comrade Qian Chunping, chairman and general manager of the company, and the company's senior management team accompanied them to visit the production workshop and product exhibition hall of Kemet Aluminum in Linyi High-tech No. 1 Factory District, and introduced the company's product layout, technological innovation and marketing. During this period, the participants also experienced the sound insulation effect and high water resistance of the "Mikel" system doors and windows independently developed by the company, and expressed their optimism about the market prospect of the "Mikel" door and window system. Director Zhang spoke highly of the outstanding achievements made by Kemet Aluminum in production and operation and the great contribution made by Kemet Aluminum to improving the quality of building exterior window profiles in Linyi and even Shandong Province. Finally, the leaders of Linyi Construction Bureau, experts from the door and window industry, together with technical experts from Kermit Aluminum, also communicated with each other on the indicators of Mikel system doors and windows and on improving the quality of housing construction. The quality of aluminum alloy doors and windows directly affects the quality and quality of housing. Yuelan Mountain is a high-end community located in the core area of the intersection of lanshan district and luozhuang District in Linyi City. It is the promotion community of Kemet's "Mikel" system doors and windows, and it is also a leading project in the south of the city. During the on-site inspection of the project site, Director Zhang inquired about the progress of the project in detail, and witnessed the construction process of aluminum alloy doors and windows. After listening to the report and explanation of the project quality by the relevant person in charge of the project, he gave a very high evaluation. Director Zhang expressed the hope that in the future construction management, the project team will continue to maintain a good style of civilized construction and civilized management, strictly control quality, and build a high-quality and unique landmark project for Linyi City. After observing the scene, the third meeting of Linyi Municipal Bureau of housing and urban rural development was held in the conference hall of Jiangquan hotel. At the meeting, Ou Qunlin, executive vice president of Kermit Aluminum, as a representative of the system door and window enterprise, made a report on "improving the quality of building exterior windows and improving the quality of housing construction". The report introduced the company's introduction, the development trend of system doors and windows, the problems existing in ordinary doors and windows, the characteristics of system doors and windows, the technical indicators of Mikel door and window system, the economic indicators of Mikel door and window system development ideas, etc, it was unanimously endorsed and recognized by the participants. The convening of this meeting shows Linyi City's confidence and determination to strengthen the city's project quality management and improve the quality of housing construction. It also strengthens the technical exchanges on system doors and windows between the Construction Bureau, door and window factories, real estate groups and aluminum profile manufacturers. As one of the few systematic doors and windows R & D and promotion enterprises in Linyi City, Kemet Aluminum not only produces high-quality aluminum alloy profiles, but also closely follows the industrial policies and plans of the national government and is committed to making unremitting efforts in people's high-quality aluminum life of energy conservation and environmental protection.

View the details>>

< 1...545556...60 >