NEWS

Home page

Kemet Share | Product Features of Common Surface Treatment Process for Aluminum Profiles

Release time:

2021-12-15

Aluminum profiles are aluminum materials with different cross-sectional shapes obtained by hot melting and extrusion of aluminum rods. In order to improve the decorative effect, enhance corrosion resistance and extend the service life, aluminum profiles are generally surface treatment. There are many Kemet aluminum profile production lines. The surface treatment methods covered include oxidation, electrophoresis, spraying, fluorocarbon, wood grain transfer printing and heat insulation (wearing strip and glue injection). The physical and chemical properties of each product are superior.

aluminum profile is an aluminum material with different cross-sectional shapes obtained by hot melting and extrusion of aluminum rods. In order to improve the decorative effect, enhance corrosion resistance and extend the service life, aluminum profiles are generally surface treatment. There are many Kemet aluminum profile production lines. The surface treatment methods covered include oxidation, electrophoresis, spraying, fluorocarbon, wood grain transfer printing and heat insulation (wearing strip and glue injection). The physical and chemical properties of each product are superior.

Anodizing

Anodizing is carried out in sulfuric acid solution with a density of 1.5A/DM2 and a voltage of 18-20 volts to produce a dense anodic oxide film. After sealing with Ni and Co, a natural color is obtained, which is the same as that of aluminum.

Powder Spraying

Powder spraying uses powder coating, and electrostatic spraying is used in the process. Under the influence of accelerated wind, it is cured at high temperature to enhance the adsorption strength of the coating and prevent the paint film from falling off. The product has a very high scientific and technological composition, the deployment of different colors of the paint, produce different colors of the decorative effect, more in line with the needs of interior decoration.

Fluorocarbon paint spraying

The product is beautiful and resistant to dirt. Once coated with oil, it is very easy to clean. Mechanical properties of strong wear resistance, excellent impact resistance, especially in the harsh climate and environment shows a long-term resistance to fading, frost resistance, resistance to air pollution (acid rain, etc.) corrosion, resistance to ultraviolet light performance, crack resistance and strong performance and can withstand bad weather environment, mainly used in large curtain wall construction and high-grade doors and windows engineering.

Water-based paint spraying

has high energy saving and environmental protection characteristics, and at the same time has extraordinary texture and plump gloss, surpassing traditional aluminum special coatings. Especially for indoor, water-based paint beautiful and solemn appearance, extraordinary texture, plump gloss favored by customers. The raw and auxiliary materials used in the product are in line with health and environmental protection standards, and it is a veritable low-carbon, green and healthy building decoration profile.

wood grain transfer

aluminum surface treated with wood grain paper with good weather resistance and corrosion resistance can obtain all kinds of natural wood grain patterns, which can not only meet the desire of modern luxury decoration and return to nature, but also avoid the disadvantages of natural wood being easy to rot and moth.

wear-type heat insulation profile is a composite profile with heat insulation function formed by structural connection between building aluminum alloy profile and building hard plastic heat insulation strip (hereinafter referred to as heat insulation strip) through hobbing, wear strip, rolling and other processes. It can significantly reduce the heat exchange inside and outside the building, and has obvious heat insulation and energy saving and good environmental protection effect.

pouring heat insulation profile is to inject liquid heat insulation material into the pouring groove of aluminum alloy profile and solidify, cut off the connecting bridge in the pouring groove of aluminum alloy profile, and combine the two aluminum alloys into composite profile with tonized heat insulation material. The injection type heat insulation aluminum profile has the characteristics of compact structure, high profile strength, good heat insulation performance and high window rate.

Kemet can produce thousands of aluminum profile surface treatment products, including anodic oxidation, electrophoretic coating (with light and extinction), powder coating, wood grain transfer printing, three-dimensional wood grain, 3D.4D hand feeling three-dimensional wood grain, fluorocarbon paint spraying, water-based paint spraying, heat insulation (through strip type, pouring type) and other building and industrial profiles, widely used in building doors and windows engineering, large curtain wall, high-end decoration and industrial manufacturing fields. The complete product series realizes the one-stop procurement of surface treatment process products in Kemet, which can give customers more choices, improve their competitiveness in the market, and walk in the forefront of the market.

Kemet Share | Talking about the Application and Research and Development of Passive Windows

Kemet Share | The Difference between South and North System Doors and Windows