Kemet Share | The Difference between South and North System Doors and Windows


Release time:

2021-12-03

Different regions and different climate, the corresponding decoration is not the same. The design in the north is mainly atmospheric. The design in the south is mainly exquisite. Of course, this kind of decoration differentiation will also affect the choice of doors and windows. The four seasons in northern China have obvious changes and are windy and sandy. The climate in the south is humid and humid, especially in coastal areas, except for wet and cold, there are typhoons and other climates. These are all factors that need to be considered in designing system doors and windows.

Different regions and different climates, the corresponding decoration is not the same. The design in the north is mainly atmospheric. The design in the south is mainly exquisite. Of course, this kind of decoration differentiation will also affect the choice of doors and windows. The four seasons in northern China have obvious changes and are windy and sandy. The climate in the south is humid and humid, especially in coastal areas, except for wet and cold, there are typhoons and other climates. These are all factors that need to be considered in designing system doors and windows. As the mainstream product of door and window decoration in recent two years, the system doors and windows are relatively high-end compared with the conventional aluminum alloy doors and windows. However, not all areas of the system doors and windows are the same, different regions of different climate environment, the system window configuration is not the same, but often many people ignore these.

doors and windows need to meet various functions such as heat insulation, sound insulation, wind pressure resistance, water tightness, air tightness, sun shading and so on, so as to provide people with a comfortable and quiet indoor living environment. However, China has a vast territory, and the climate difference between the south and the north is huge. The regional difference makes people different and focus on the characteristics and functions of products when choosing doors and windows, which is also the design and selection of architectural doors and windows, the difficulty coefficient has been increased. Therefore, when discussing the topic of "the difference between north and south system doors and windows", it is necessary to analyze in depth from various factors.

Analysis of Difference Factors between South and North

1. Temperature Difference:

In the picture, it can be seen that in the north, the four seasons change obviously, the climate is dry, the wind and sand are heavy, the winter is very cold, the temperature difference between day and night is large, and it is dry all the year round. Therefore, wind pressure resistance and thermal insulation are the key points in the purchase of doors and windows.

In the south, the climatic conditions are more complicated. Summer is hot and humid and winter is cold, and the climate is humid, especially in coastal areas. In addition to cold and humid, there are typhoons and other climates. Although the temperature in winter is higher than that in the north, the sunshine is far worse than that in the north.

2. Performance Difference

Buildings account for 39% of energy consumption and carbon dioxide emissions. The absolute value of the temperature difference between the four seasons in the north and the temperature difference between indoor and outdoor is destined to require products with excellent thermal insulation performance to ensure indoor temperature, improve occupant comfort, and reduce energy consumption. This is why in recent years, some cities in the north of the door and window insulation performance of local standards continue to improve the reason.

Relative to the north, the south is warm in winter and hot in summer, but the characteristics of frequent typhoons and large amount of rain in summer make it pay special attention to the airtightness, watertightness and wind pressure resistance of doors and windows. Especially in areas that are often hit by typhoons, it is related to life and property safety. Every landing is a severe test of the performance of doors and windows. Only in the relevant performance to do a good job of protection, put an end to security risks. In addition, due to usage habits, windows are mostly opened in South China, and the national energy-saving standards have no special requirements on the heat insulation performance of doors and windows in South China, so doors and windows in South China are mostly non-insulated doors and windows.

Differences in 3. Apartments

Northern Apartments attach importance to heat preservation and heat insulation, while southern Apartments attach importance to ventilation and ventilation. Affected by sunshine height and severe cold, northern Apartments are average, with large depth and small windows but large quantity. Southern Apartments have small depth, pay attention to orientation, emphasize bright light, and favor wide convex windows and floor-to-ceiling windows.

4. Decoration Difference

When decorating in the north, the room temperature should not be too low, otherwise the cement will easily freeze and condense. Because of the severe cold in winter and windy sand in spring and autumn, the north usually chooses to seal the balcony with hollow glass or use sliding doors to partition the balcony and living room, which not only ensures the drying of clothes, but also avoids the entry of windy sand. In the south, moisture and moisture are very serious, especially when returning to the south, clothes should generally be dried outside the balcony so as to dry in time. In particularly humid areas, both furniture and decoration pay great attention to moisture-proof performance.

Characteristics of North-South System Windows

Combined with the above factors, we make a differential analysis of South-North System Windows and Doors:
South Windows and Doors:
South China is a hot summer and warm winter area, which is long in summer, hot in summer, with many mosquitoes, warm in winter and mainly open windows, therefore, in the selection of doors and windows, steel yarn integrated protection and external opening system doors and windows can be selected. However, rainy seasons and typhoons accompany the coastal areas of South China. Owners here should consider water sealing, wind pressure resistance and heat insulation performance when purchasing doors and windows.
So the wall thickness of doors and windows in South China should not be less than 1.8mm; Glass should choose 5 + 20A +5 double-layer hollow Low-E glass, which has better heat insulation effect. Kemet system door and window system according to the practice of the national door and window market for many years, carry out the recommendation of related products. Kemet XK125 steel yarn integrated protection and external opening system window, with excellent air and water tightness, can widely meet the construction needs of the south.

North Doors and Windows:

Northeast and most northwest regions belong to severe cold regions. The selection of doors and windows here should give more consideration to sealing and heat preservation performance. The system 75-95 series can be selected, and the heat insulation strip configuration is 35.3mm. The above specifications should choose double-layer hollow glass or three-glass two-cavity glass in glass configuration, and four-glass three-cavity glass can be considered in northern Heilongjiang. The northern region belongs to a cold region, and the average temperature of the coldest month is 0 ℃-10 ℃;

Therefore, the selection of system doors and windows should be based on heat preservation doors and windows. The system 60-70 series can be selected. The configuration of heat insulation strips is not less than 24mm. In terms of glass configuration, we suggest to choose three-glass and two-cavity glass. However, some consumers choose double-layer hollow glass when budget is also possible, however, considering energy saving and heat preservation, three-glass two-cavity glass is more heat preservation and energy saving than double-layer insulating glass. Kemet system doors and windows system combined with the factors of the northern market, the recommendation of related products. The Kemet XK65 has an internal suspension system window with excellent thermal insulation performance, which can widely meet the building needs of the north.

In summary, with the continuous improvement of people's living standards and quality of life and the continuous rise in housing prices, consumers' acceptance of system doors and windows, whether in the south or the north, is also valued for cost performance.

Because the choice of doors and windows is very important in the decoration of indoor buildings, it is not only a channel for indoor and outdoor air communication, but also a barrier for the safety and privacy of indoor buildings. Only by choosing suitable doors and windows can the best decoration effect be achieved, ensuring people's home safety and improving the quality of home. There are differences between doors and windows in southern and northern systems, but the most important thing is to consider comprehensively in many aspects, return to their own needs.