How to deal with the common problems of sliding doors?


Release time:

2017-08-01

Sliding door, also called sliding door. In addition to providing sealing and dustproof functions for wardrobes and cloakrooms, it can also be used in kitchens, balconies, bathrooms and other places to play a good role in space separation and increase privacy. There will always be some problems in the use and installation of sliding doors. Kai summed up several common problems and solutions. As follows: Q1 sliding door feels heavy and difficult to move. How to deal with it? 1. The hanging rail is not matched with the hanging wheel, and matching products can be selected. 2. When the hanging rail is deformed during installation, replace the hanging rail; 3. If the hanging rail is not horizontal, readjust the horizontal level of the hanging rail; 4, the lower edge of the door collides with the ground, or the locator and the door are not on a vertical line, adjust the height of the door or move the locator position; 5; 6, the door left and right have high and low, adjust the door left and right height. Q2 How to measure the size of the glass sliding door? When measuring the size of the glass sliding door, it is mainly to measure the height and width. To measure the height dimension, first measure the height of the sliding door, then add the depth of the glass opening above the sliding door, and subtract 0.1cm. This is the accurate height dimension of the glass sliding door. For example, if the height of the sliding door is 45cm and the depth of the upper glass groove is 0.8cm, the height of the glass sliding door should be 45.7cm. To measure the width dimension, just measure the opening (width) of the sliding door accurately, then divide the dimension into two parts, and add about 3cm on each side, which is the width dimension of the glass sliding door. For example, if the opening of the sliding door is 100cm, the width of the two glass sliding doors is 53cm respectively. Summary: The formula is: height = height of sliding door -0.1cm; Width = width of sliding door/23cm. Q3 How many times can the sliding door of pulley generally push and pull? The sliding door generally requires to push and pull more than 60000 times, and the brand can reach more than 100000 times. The material of the pulley is also very important. At present, there are mainly plastic pulleys, metal pulleys and glass fiber pulleys. The plastic pulley is hard, but it will be astringent, hard and unable to slide when used for a long time; the metal pulley is strong, but it will produce noise when in contact with the track; the glass fiber has good toughness, good wear resistance and smooth sliding. In addition, a good pulley is often designed with two anti-jumping devices to ensure that the sliding door is safe from derailment. This warns users to choose carefully when buying sliding doors. Q4 Several ways to install doors in kitchens and bathrooms: The original door openings in many kitchens and bathrooms are generally small. If you want to install sliding doors, there are two ways: 1. Expand the original door opening to leave space for two doors, which is more flexible and the toilet can be locked; 2. Install a monorail sliding door, which can be made into a clamping wall, which can be hidden when opened, or installed outside the door opening, if the side is installed, it is best to make a curtain box style box above the door opening, which is both beautiful and safe. Q5 How to clean the sliding door? 1. Clean the surface of the sliding door regularly with soft cloth dipped in clean water or neutral detergent. Do not use ordinary soap and washing powder, and do not use strong acid and alkali detergents such as decontamination powder and toilet detergent. 2. It is not allowed to use sandpaper, wire brush or other friction for cleaning. After cleaning, clean it with clean water, especially where there are cracks and dirt, and wipe it with alcohol on a soft cloth. 3. If the main material of the sliding door is made of plate material, the moisture of the wet cloth used during cleaning should not be too much, as long as it is moist.

sliding door, also called sliding door. In addition to providing sealing and dustproof functions for wardrobes and cloakrooms, it can also be used in kitchens, balconies, bathrooms and other places to play a good role in space separation and increase privacy.
There will always be some problems in the use and installation of sliding doors. Kai summed up several common problems and solutions. As follows:

Q1 sliding door feels heavy and difficult to move, how to deal with it?
1. The hanging rail is not matched with the hanging wheel, and matching products can be selected.
2, the hanging rail is deformed during installation, and the hanging rail is replaced;
3, the hanging rail is not horizontal, readjust the level of the hanging rail;
4, the lower edge of the door collides with the ground, or the locator and the door are not on a vertical line, adjust the height of the door or move the locator position;
5, or the outer cladding is too soft, replace the hanging wheel;
6. The left and right sides of the door are high and low, and the left and right sides of the door are adjusted.

Q2 How to measure the size of the glass sliding door?
When measuring the size of the glass sliding door, it is mainly to measure the height and width.
measure the height dimension. first measure the height of the sliding door, then add the depth of the glass opening above the sliding door, and subtract 0.1cm. this is the exact height dimension of the glass sliding door.
For example, if the height of the sliding door is 45cm and the depth of the upper glass groove is 0.8cm, the height of the glass sliding door should be 45.7cm.
measure the width dimension, as long as the opening (width) of the sliding door is measured accurately, then the dimension is divided into two parts, and each side is added about 3cm, which is the width dimension of the glass sliding door. For example, if the opening of the sliding door is 100cm, the width of the two glass sliding doors is 53cm respectively.
Summary: The formula is: height = height of the sliding door part -0.1cm; width = width of the sliding door part/2 3cm.

How many times can the sliding door of Q3 pulley generally push and pull?
The sliding door generally requires to push and pull more than 60000 times, and the brand can reach more than 100000 times. The material of the pulley is also very important. At present, there are mainly plastic pulleys, metal pulleys and glass fiber pulleys. The plastic pulley is hard, but it will be astringent, hard and unable to slide when used for a long time; the metal pulley is strong, but it will produce noise when in contact with the track; the glass fiber has good toughness, good wear resistance and smooth sliding. In addition, a good pulley is often designed with two anti-jumping devices to ensure that the sliding door is safe from derailment. This warns users to choose carefully when buying sliding doors.

Q4 Several ways to install doors in kitchens and toilets:
The original door openings of many kitchens and toilets are generally small. If you want to install sliding doors, there are two ways:
1. Expand the original door opening to leave space for two doors, which is more flexible and the toilet can be locked;
2. Install a monorail sliding door, which can be a clip wall and hidden when opened, or on the outside of the door opening, if the side is best to do a curtain box style box above the door opening, both beautiful and safe.

Q5 How to clean the sliding door?
1. Clean the surface of the sliding door regularly with a soft cloth dipped in clean water or neutral detergent. Do not use ordinary soap and washing powder, and do not use strong acid and alkali cleaning agents such as decontamination powder and toilet detergent.
2. It is not allowed to use sandpaper, wire brush or other friction materials for cleaning. After cleaning, clean with clean water, especially where there are cracks and dirt, and wipe with alcohol on a soft cloth.
3. If the main body of the sliding door is made of plate material, the wet cloth used during cleaning should not have too much moisture, as long as it is moist.