Door and window enterprises have noticed that environmental protection inspectors have checked these 24 items!
Release time:
2017-08-22
What do environmental inspections check? 1. Focus on the outstanding environmental problems that are highly concerned by the central government, strongly reflected by the masses, and have a bad social impact and their handling; 2. Check the regional river basins and remediation where the environmental quality is deteriorating; 3. Inspect the environmental protection of local party committees and governments and their relevant departments Inaction and disorderly actions; 4. Understand the local implementation of environmental protection party and government responsibility, one post and two responsibilities, and strict accountability. What should be checked in local environmental protection inspection? 1. While checking the door and window accessories, the auxiliary materials with powder and related coal-fired boilers should be sealed up; 2. Products with noise and strong smell should also be rectified; 3. Manufacturers without business license and non-standard should be rectified again; 4. By the way, there are hidden fire safety hazards; 5. By the way, fake and fake brand should be checked. In addition, the door and window factory has one of the following problems, will face fines, shut down, ordered rectification, interviews and other penalties! [(1) Steal discharge of waste water, (2) discharge of pungent gases such as paint smell, (3) Low frequency noise or excessive noise, (4) Dust pollution, (5) Failure to publicize EIA] 6. No environmental protection approval procedures; 7. There are potential safety hazards in the operation of the motor unit; 8. Illegal construction; 9. Private underground pipe discharge; 10. Cinders are scattered everywhere; 11. Problems in paper slag excavation and landfilling; 12. No waste water recovery system; 13. No water intake permit; 14. No bright light operation; 15. Storage of other wastes in ponds without anti-leakage measures; 16. Poor and old pollution control facilities; 17. Excessive smoke and dust emission concentration; 18. The accumulated garbage in the plant area is not treated in time; 19. Failure to go through the approval procedures for environmental impact assessment documents; 20. The pollution control facilities are not checked and accepted by the environmental protection department; 21. The sewage discharge permit expires; 22. Illegal production; 23. The COD of the filter tank exceeds the standard; 24. No sewage discharge permit. In 2016, China completed the pilot project in Hebei Province and the first batch of central environmental protection inspectors in eight provinces (regions), including Inner Mongolia, and ended the second batch of inspectors stationed in seven provinces (cities), including Beijing, Shanghai and Guangdong, at the end of that year. A total of more than 33000 reports were accepted, more than 8500 cases were put on file for punishment, more than 0.44 billion yuan was fined, more than 800 cases were put on file for investigation, 720 people were detained, 6307 people, and 6454 people were interviewed, and held accountable. At present, the party committees and governments of 21 provinces (autonomous regions and municipalities) across the country have issued provincial environmental protection inspection plans, and more than 20 provinces (autonomous regions and municipalities) have established environmental protection inspection agencies. Hebei, Shanxi, Anhui, Fujian, Sichuan, Guizhou, Xinjiang and other provinces (regions) have initiated the supervision of the prefectural and municipal party committees and governments, forming a two-level supervision system at the central and provincial levels, which is promoting the implementation of environmental protection. "One post and two responsibilities" has played a role. The Ministry of Environmental Protection will continue to guide all localities to carry out provincial environmental protection inspectors. From this point of view, the door and window enterprises only in the safety, environmental protection, technology, equipment and other aspects of continuous improvement, can not be afraid of this "environmental protection" storm.
What does the environmental inspection check?
1. Focus on the outstanding environmental problems that the central government pays great attention to, the masses reflect strongly, and the social impact is bad and their treatment;
2. Inspect the regional river basins where the environmental quality shows a deteriorating trend and the remediation situation;
3. Inspect the environmental protection inaction and disorderly actions of the local party committee and government and their relevant departments;
4. Understand the local implementation of the same responsibility of the party and government for environmental protection, double responsibility for one post, and strict accountability.
What are the local environmental inspections to check?
1. While checking the door and window accessories, the auxiliary materials with powder and related coal-fired boilers should be sealed up;
2. Products with noise and strong smell should also be rectified;
3. Manufacturers without business license and non-standard need to be reorganized;
4. By the way, check the hidden danger of fire safety;
5. Check the fake and fake brand by the way. In addition, the door and window factory has one of the following problems, will face fines, shut down, ordered rectification, interviews and other penalties! [(1) illegal discharge of waste water, (2) discharge of pungent gases such as paint smell, (3) low frequency noise or excessive noise, (4) dust pollution, (5) failure to publicize environmental impact assessment]
6. no environmental protection approval procedures;
7. potential safety hazards in the operation of the motor unit;
8. illegal construction;
9. setting up private concealed pipes for sewage discharge;
10. Coal cinder drifts everywhere;
11. There are problems in paper slag digging and landfilling;
12. No waste water recovery system;
13. No water intake permit;
14. No bright light operation;
15. Storage of other wastes in ponds without anti-leakage measures;
16. Poor and old pollution control facilities;
17. Excessive smoke emission concentration;
18. The accumulated garbage in the factory area was not disposed of in time;
19. Failure to go through the approval procedures for environmental impact assessment documents;
20. Pollution control facilities have not been accepted by the environmental protection department;
21. Expired pollution discharge permit;
22. Illegal production;
23. COD in the filter tank exceeds the standard;
24. No pollution discharge permit.
In 2016, my country has completed the pilot project in Hebei Province and the first batch of central environmental protection inspectors in 8 provinces (regions) including Inner Mongolia, and completed the second batch of inspections in 7 provinces (cities) including Beijing, Shanghai, and Guangdong at the end of that year.) Inspectors stationed, accepted more than 33000 reports from the masses, filed more than 8500 penalties, fined more than 0.44 billion yuan, filed more than 800 investigations, detained 720 people, and interviewed 6307 people, accountability 6454 people.
At present, the party committees and governments of 21 provinces (autonomous regions and municipalities) across the country have issued provincial environmental protection inspection plans, and more than 20 provinces (autonomous regions and municipalities) have established environmental protection inspection agencies. Hebei, Shanxi, Anhui, Fujian, Sichuan, Guizhou, Xinjiang and other provinces (regions) have initiated the supervision of the prefectural and municipal party committees and governments, forming a two-level supervision system at the central and provincial levels, which is promoting the implementation of environmental protection. "One post and two responsibilities" has played a role. The Ministry of Environmental Protection will continue to guide all localities to carry out provincial environmental protection inspectors. From this point of view, doors and windows enterprises only in the safety, environmental protection, technology, equipment and other aspects of continuous improvement, can not be afraid of this "environmental protection" storm.
Contact Information
Customer Service Tel: +86-539-7177878
Mailbox: kemet@sdkemet.com
Zip Code: 273400
Address: Linyi City, Shandong Province
Copyright©2023 Kemet New Materials Technology Co., Ltd. All Rights Reserved